20 vectron international ?267 lowell road, hudson, nh 03051 ?tel: 1-88-vectron-1 ?web: www.vectron.com voltage controlled crystal oscillators (vcxo s) vc-400/401/410/411/415 series ( co-600v series) performance characteristics description: low jitter capable, pecl output vcxo in a dip, gull-wing or smd package. features: ?155.52 mhz standard, other frequencies available from 10 mhz to 170 mhz jitter performance <1 ps rms @ 155.52 mhz ?temperature stability to 20 ppm -40? to +85? ?aging: 10 ppm for 10 years typical ?ecl or pecl output ?complementary output available ?package: single dip, gull wing, or true surface mount fr4 standard frequency: fo 10 170 mhz supply: c vdd 4.75 5.0 5.25 v d vdd 3.13 3.3 3.46 v g vdd -4.94 -5.2 -5.46 v j vdd -4.27 -4.5 -4.72 v current: single ended output icc 60 ma complementary output icc 50 ma output type: c ecl d pecl e complementary ecl f complementary pecl rise/fall time (20-80%): tr/tf 1.5 ns symmetry (duty cycle): sym 45 55 % temperature range: -40 +85 ? aging (10 years): 10 ppm jitter (12 khz - 20 mhz): 0.5 1 ps deviation/stability: see how to order control voltage: pecl, 3.3v vc 0.3 3.0 v pecl, 5v vc 0.5 4.5 v ecl, -4.5v vc -0.5 -4.5 v ecl, -5.2v vc -0.5 -4.5 v transfer function: pecl positive ecl negative linearity (bsl): see ordering information % ssb phase noise (@ 155.52 mhz) 10hz -50 dbc/hz (typical) 100hz -80 dbc/hz 1khz -115 dbc/hz 10khz -135 dbc/hz 50khz -140 dbc/hz modulation bandwidth: bw 10 khz package size: 400 20.32x12.70x10.8 mm (0.8?0.5?0.425? 4 pin dip 401 20.32x12.70x10.8 mm (0.8?0.5?0.425? 5 pin dip 410 20.32x12.70x11.43 mm (0.8?0.5?0.45? 4 pin gull wing 411 20.32x12.70x11.43 mm (0.8?0.5?0.45? 5 pin gull wing 415 20.32x13.72x5.72 mm (0.8?0.54?0.225? smd parameter symbol minimum typical maximum unit 8798_aa's vectron 05/30/02 3:11 pm page 20
vectron international ?267 lowell road, hudson, nh 03051 ?tel: 1-88-vectron-1 ?web: www.vectron.com 21 voltage controlled crystal oscillators (vcxo s) notes: 1. pin numbers are for reference only. they do not appear on the unit. 2. dimensions are in inches and (millimeters). notes: 1. pin numbers are for reference only. they do not appear on the unit. 2. dimensions are in inches and (millimeters). *pin 9 present only on complementary output units. requires 5 pin base. pin function pecl ecl 1 vcxo vcxo 7 ground supply(-) 8 output q q 9* output q q 14 supply(+) gnd co-410/411 outline drawing vc-400/401 outline drawing vc-400/401/410/411 series pin out information *pin 9 present only on complementary output units. requires 5 pin base. pin function pecl ecl 1 vcxo vcxo 7 ground supply(-) 8 output q q 9* output q q 14 supply(+) gnd pin out information vc-400: 4 pin vc-401: 5 pin vc-410: 4 pin vc-411: 5 pin vcxo 8798_aa's vectron 05/30/02 3:11 pm page 21
22 vectron international ?267 lowell road, hudson, nh 03051 ?tel: 1-88-vectron-1 ?web: www.vectron.com voltage controlled crystal oscillators (vcxo s) notes: 1. pin numbers are for reference only. they do not appear on the unit. 2. dimensions are in inches and (millimeters). *pin 9 present only on complementary output units **disable = pecl high, oscillator shuts off. floating or pecl low normal operation. pin function pecl ecl 1 vcxo vcxo 6** disable disable 7 gndsupply(-) 8 output signal, q q 9* output signal, q q 14 supply(+) gnd outline drawing recommended pad dimensions pin out information vc-415 series 8798_aa's vectron 05/30/02 3:11 pm page 22
vectron international ?267 lowell road, hudson, nh 03051 ?tel: 1-88-vectron-1 ?web: www.vectron.com 23 voltage controlled crystal oscillators (vcxo s) recommended soldering profile ordering information vc temperature temperature *minimum code range stability deviation b-205g 0/+50? 20 ppm 50 ppm c-205g 0/+70? 20 ppm 50 ppm c-405h 0/+70? 40 ppm 100 ppm d-305j -20/+70? 30 ppm 60 ppm d-405h -20/+70? 40 ppm 100 ppm f-405j -40/+85? 40 ppm 60 ppm f-505h -40/+85? 50 ppm 100 ppm f-205g -40/+85? 20 ppm 50 ppm frequency 10 - 170 mhz 400 d c 205g 155.52 product family vc =vcxo supply v oltage c = 5.0v 5% d = 3.3v 5% g = -5.2v 5% j = -4.5v 5% mhz package 400 = 4 pin dip 401 = 5 pin dip 410 = 4 pin gullwing 411 = 5 pin gullwing 415 = smd output c = ecl d = pecl e = complementary ecl f = complementary pecl vc-400/401/410/411/415 series b vcxo 8798_aa's vectron 05/30/02 3:11 pm page 23
|
